13TW5v2-2 13.5-inch Subwoofer (600 W, 2 Ω)

$999.00

In keeping with its “tight-spaces” mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.

The 13TW5v2 is best used with amplifier power in the 250W – 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.

Never has such high-quality sub-bass been possible in the most challenging installation applications.

Out of stock

Category: Product ID: 3123

Description

Continuous Power Handling (RMS) 600 W
Recommended Amplifier Power (RMS) 250 – 600 W
Nominal Impedance (Znom) 2 Ω

Nominal Diameter 13.5 in / 345 mm
Overall Diameter (A) A1: 14.2 in / 361mm
A2: 13.0 in / 330 mm
Mounting Hole Diameter (B) 12.5 in / 318 mm
Bolt Hole Circle Diameter (C) 13.5 in / 343 mm
Motor Outer Diameter (D) 6.75 in / 171 mm
Mounting Depth (E) 2.625 in / 67 mm
Driver Displacement 0.052 cu ft / 1.47 L
Net Weight 20.5 lb / 9.3 kg

Free Air Resonance (Fs) 25.95 Hz
Electrical “Q” (Qes) 0.51
Mechanical “Q” (Qms) 10.648
Total Speaker “Q” (Qts) 0.479
Equivalent Compliance (Vas) 2.26 cu ft / 64.00 L
One-Way Linear Excursion (Xmax)* 0.433 in / 11 mm
Reference Efficiency (no) 0.23%
Efficiency (1 W / 1 m)** 85.51 dB SPL
Effective Piston Area (Sd) 98.26 sq in / 0.0634 sq m
DC Resistance (Re) 2.100 Ω
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Phone: 03 9469 5549
VIC Australia